Download PDF file - finechips

Preface
The S3CC11B/FC11B Microcontroller User's Manual is designed for application designers and programmers who are
using the S3CC11B/FC11B microcontroller for application development. It is organized in two main parts:
Part I
Programming Model
Part II
Hardware Descriptions
Part I contains software-related information to familiarize you with the microcontroller's architecture, programming
model, instruction set, and interrupt structure. It has seven chapters:
Chapter 1
Chapter 2
Chapter 3
Product Overview
Address Spaces
Calm16Core
Chapter 4
Chapter 5
Chapter 6
Exceptions
Memory Map
Instruction Set
Chapter 1, "Product Overview," is a high-level introduction to S3CC11B/FC11B with general product descriptions, as
well as detailed information about individual pin characteristics and pin circuit types.
Chapter 2, "Address Spaces," describes program and data memory spaces. Chapter 2 also describes ROM code
option.
Chapter 3, " Calm16Core," describes the special registers.
Chapter 4, " Exceptions ," describes the internal register file.
Chapter 5, " Memory Map," describes the S3CC11B/FC11B memory map structure in detail.
Chapter 6, " Instruction Set," describes the S3CC11B/FC11B instruction set structure in detail.
A basic familiarity with the information in Part I will help you to understand the hardware module descriptions in Part
II. If you are not yet familiar with the S3CK-series microcontroller family and are reading this manual for the first time,
we rec ommend that you first read Chapters 1–3 carefully. Then, briefly look over the detailed information in Chapters
4, 5 and 6. Later, you can reference the information in Part I as necessary.
Part II "hardware Descriptions," has detailed information about specific hardware components of the
S3CC11B/FC11B microcontroller. Also included in Part II are electrical, mechanical. It has 20 chapters:
Chapter 7
Chapter 8
Chapter 9
Chapter 10
Chapter 11
Chapter 12
Chapter 13
Chapter 14
Chapter 15
Chapter 16
Chapter 17
PLL (Phase Locked Loop)
RESET and Power-Down
I/O Ports
Basic Timer
Watch Timer
8-bit Timer 0
16-Bit Timer 1 (8-Bit Timer A & B)
Serial I/O Interface
SSFDC (Solid State Floppy Disk Card)
10-Bit Analog-to-Digital Converter
CODEC
Chapter 18
Chapter 19
Chapter 20
Chapter 21
Chapter 22
Chapter 23
Chapter 24
Chapter 25
Chapter 26
LCD Controller / Driver
Battery Level Detector
8/16-Bit Serial Interface for
External Codec
CaimMAC1616
Program Memory Access Speed
Electrical Data
Mechanical Data
S3FC11B Flash MCU
Development Tools
One order form is included at the back of this manual to facilitate customer order for S3CC11B/FC11B
microcontrollers: the Flash Factory Writing Order Form.
You can photocopy this form, fill it out, and then forward it to your local Samsung Sales Representative.
S3CC11B/FC11B MICROCONTROLLER
iii