Download Authoring Tools User Guide - Auro-3D

Transcript
Auro-3D Authoring Tools Plug-ins
rotary encoders attenuate only, are always enabled, and default to 0 dB.
INFO:
When the Downfold Enable switch of a connected Auro-Panner is active, the Auro-Bus
Downfold Settings will not have any additional effect on that Auro-Panner’s audio.
Height and Top Gain
Both of these controls attenuate only, and are at 0 when fully clockwise.
•
Adjust Height gain to send the desired height layer signal amount from this Auro-Bus to
the planar mix.
•
Adjust Top gain to send the desired top layer signal amount from this Auro-Bus to the
planar mix.
43