Download Technical Manual

p 3/51
Table of Contents
1. SAFETY WARNINGS
4
2. DESCRIPTION
5
2.1. Locating Components
2.2. Operating Principle
2.3. Control Board
5
7
8
3. INSTALLATION
26
3.1.
3.2.
3.3.
3.4.
3.5.
3.6.
26
27
28
31
32
33
Preparing the Base Plate
Placing the Equipment
Conversion From One Solution To Another
Installation of a Round Arm
Installation of the Tip Support
Electrical Connections
4. ADJUSTMENTS
34
4.1.
4.2.
4.3.
4.4.
34
35
38
39
Positioning of the levers on the Shaft
Balancing of the Boom Arm by means of the Spring
Levelling of the Boom Arm
Adjusting the Limit Switches (Microswitches)
5. USE
40
5.1.
5.2.
5.3.
5.4.
Commissioning
Maintenance
Breakdowns and Remedies
Prolonged Stoppage / Destruction
40
40
41
41
6. TECHNICAL SPECIFICATIONS
42
7. DIMENSIONS
43
8. INSTALLATION DRAWINGS
44
9. ELECTRICAL DIAGRAMS
46
9.1. Control blocks assignment
47
10. "EC" CERTIFICATE OF CONFORMITY
50
Technical Manual BL229 -MT-EN
The informat ion in th is document is the property of Automat ic Systems and is confident ial. The consignee withholds f rom using it for anyth ing other than the use of the
products or the execut ion of the project to wh ich they belong and withholds fr om communicat ing it to th ird part ies without pr ior wr it ten agreement from Automatic Systems .
Document subject to change without pr ior not ice.