Download FileDirector Enterprise Manager

FileDirector Enterprise Manager
DMZ Settings
This option is only used in conjunction with a DMZ (see installation guide).
Functions can be activated exclusively for a server that is located in a protected
zone. No external or unwanted actions can be executed.
Replication
Data can be synchronised between different sites when each site is equipped with
a FileDirector server. The sites have to be connected via a network during
synchronization or data exchanges.
Clone
FileDirector
Server
ID
Replication
Original
FileDirector
Server
The replication can be configured using:
System configurationserverreplication.
To replicate data you need to create a cabinet on the original server. This cabinet
is then cloned on the replication server. See Clone cabinet structure.
Original server definition
The original server is always the server that is responsible for the documents.
When a document is created, the ID of the creating server is assigned to it, thus
marking the server responsible. The responsibility for documents can be
transferred to the target server, making it the original server for these documents.
Notes:
You need to ensure that the storage pool is available on the target server after the
clone has been created. If the storage pool is pointing to a different path, it needs to
be adjusted otherwise documents cannot be created.
Make sure that the time settings of both servers do not differ more than five minutes.
Server
Page 27