Download ZSC-250-IS - Meyertech

ZSC-250-IS User Manual.Docx
Issue 01
Page 3 of 20
Introduction
KEY FEATURES
Thank you for purchasing Meyertech’s ZSC-250-IS.
Please read this user guide prior to using this
product. It will help you to achieve the maximum
benefit from the product. The manual covers
installation and operation of the ZSC-250-IS.
•
19” Rack Mounted
•
Compatible with the ZoneVu product range
•
Allows a more flexible topology for interconnection of remote sites
•
Supports RS-485, RS-422 and RS-232
connections to remote sites
•
Isolates communication faults on remote
connections for added resilience
•
Allows remote site connections over
medium to high latency links (e.g. WAN /
Internet)
•
16-bit embedded processing power
•
Diagnostic LEDs
•
Configuration and backup via Meyertech’s
Mpower software
What is a ZSC-250-IS?
A ZSC-250-IS is part of the ZoneVu CCTV Control family,
specifically one controller within the Meyertech Site Controller
range.
Meyertech’s ZSC-250-IS allows ZSC-500, ZSC-1000 and ZSC1000plus controlled remote sites to be connected together in a
flexible & fault tolerant architecture.
The ZSC-250-IS allows the built-in RS-485 half-duplex capable
‘Intersite port’ of a ZSC-500, ZSC-1000 or ZSC-1000plus
controller to be routed onto many point-to-point remote
connections using either RS-485, RS-422 or RS-232 formats.
Additional flexibility is afforded by the allowance for ZSC-250-IS
units to be connected together where two or more sites are
sharing a remote link.
The features described in this manual refer to:
Version 1.31.0.2 of the ZSC-250-IS firmware
MEYERTECH LIMITED are committed to continuous product development and therefore reserve the right to change specifications
without notice.
2012 ALL RIGHTS RESERVED.
MEYERTECH LIMITED
ZSC-250-IS
The information in this manual is believed to be accurate and reliable. However, Meyertech Limited assumes no responsibility or liability for its
use, or for any infringement of patents or other rights of third parties, which may result from its use. No license is granted by implication or
otherwise under any patent or other rights of Meyertech. All specifications are subject to change without prior notice.