Download Ego - MCarterBrown

Transcript
Scroll through the Timing Menu until the DWELL
parameter is displayed.
The current value of the DWELL is shown on the right
hand side of the display (See Figure 4.10)
Press the Select pushbutton to enter the edit
function and the edit indicators will appear on the
display.
Press and release the Raise pushbutton to increase
the DWELL time in 0.1 millisecond increments. Press
and hold the Raise pushbutton to increase the DWELL
time more rapidly.
Press and release the Lower pushbutton to decrease
the DWELL time in 0.1 millisecond increments. Press
and hold the Lower pushbutton to decrease the
DWELL time more rapidly.
Press Select to save the DWELL time and the edit
indicators will disappear from the display to indicate
that the value has been accepted. You have now
returned to the Timing Menu.
FIGURE 4.10
Advanced Set-Up
The Dwell parameter controls the amount of time
that the solenoid is energised and therefore the
amount of gas that is released with each shot.
Advanced Set-Up
Dwell
35