1
Download "user manual"
Transcript
Note: You can also add copy sets to a session by importing a previously exported comma-separated value (CSV) file. For more information about this procedure, see 3.10.2, “Importing CSV files” on page 132. Figure 5-12 Select the source volume Host1 for the copy set 8. The wizard prompts you to select the target volume Target1 (T1); in this case, Host1 volume Red_vol01. Select H1, as shown in Figure 5-13. Click Next. Figure 5-13 Select the target volume Target1 for the copy set 9. By using the wizard, you can add more Copy Sets to the list before they are added to the session. Click Add More in the Select Copy Sets window (as shown in Figure 5-14 on page 294) and then repeat steps 5 and 6, as needed. Confirm that the required Copy Sets are selected and then click Next. Chapter 5. Tivoli Storage Productivity Center for Replication with SAN Volume Controller and Storwize family 293
