Download Ethernet Device Configuration

How to start
3.2
15/42
Settings
Note: The settings which you adjust for the Language, the Protocols and
the DCP Configuration will also be valid when invoking the program
again.
3.2.1
Select Language
You can select the language English or German for the graphical user
interface. Select the language as follows:
1. Select under Options > Language.
Figure 7: Language Selection
 The current language is marked with a hook (see position
figure above).
2. To change the language, select the alternative language entry
3.2.2
in the
.
Select Protocol
Select the protocols to be used for searching for Ethernet-capable devices
and for configuring those devices.
Figure 8: Protocol Selection
 The activated protocol is marked with a hook.
 In the figure above both protocol types are activated
 Select under Options > Protocols > [Protocol name]
.
.
Note: If you do not know, to which protocol the devices will react, simply
select all protocols.
Ethernet Device Configuration | Address Setting for Ethernet capable Hilscher Devices
DOC050402OI07EN | Revision 7 | English | 2013-11 | Released | Public
© Hilscher, 2005-2013