Download User`s Manual
Transcript
5.3) Thread 5.3.1) Upper thread placement Hook the upper thread as shown in the following picture after setting the thread take-up lever at the highest position. As with the needle bar thread guide, hook the thread as shown in picture for heavy materials.(SPS/E1306(1507)-HS) Picture ① 5.3.2) Lower Thread Placement Thread Hole 25mm 1) Insert bobbin into bobbin case as shown in the picture. 2) After setting the lower thread through the crack of the bobbin case, insert the thread through thread hole. 3) Adjust the lower thread to hang 25mm out of thread hole. Bobbin Bobbin Case Insert the bobbin to turn clockwise when seen from behind the bobbin case Caution 21