Download (Camp Protocol).

Copyright 2005 Control Technology Inc.
All Rights Reserved
This manual is published by Control Technology Inc., 5734 Middlebrook Pike,
Knoxville, TN 37921. This manual contains references to brand and product names
which are tradenames, trademarks, and/or registered trademarks of Control Technology
Inc. Siemens® and SIMATIC® are registered trademarks of Siemens AG. Other
references to brand and product names are tradenames, trademarks, and/or registered
trademarks of their respective holders.
DOCUMENT DISCLAIMER STATEMENT
Every effort has been made to ensure the accuracy of this document; however, errors do
occasionally occur. CTI provides this document on an "as is" basis and assumes no
responsibility for direct or consequential damages resulting from the use of this
document. This document is provided without express or implied warranty of any kind,
including but not limited to the warranties of merchantability or fitness for a particular
purpose. This document and the products it references are subject to change without
notice. If you have a comment or discover an error, please call us toll-free at
1-800-537-8398.
REVISION HISTORY
Version
1.0
Version
1.1
9/9/94
Original Release
12/9/9
4
Version
2.0
5/4/95
Revised, added and corrected Error Code documentation
Added ladder logic examples
Expanded description of the PLC Command Interface
Incorporated minor corrections and additions
Removed PLC logic section (now in 2572 IOG)
Added Packed task code description
Incorporated minor corrections and additions
Version
2.1
3/10/9
8
Added Memory Exchange command.
Documented additional address classes.
Deleted “Raw” NITP and “Embedded Task Code” descriptions.
Changed Chapter 3 title from “Troubleshooting” to “Application
Development” and included sections on performance and TCP/IP
coding.
CTI 2572 Programming Reference Manual V2.1
i