Download Oracle Dome Installation Guide

Oracle
Dome Mounting
A.
Secure & hang dome to bracket by attaching safety bond spring clip to eyelet.
Note: Procedure is the same for all installations.
Note: Ceiling installation is made easier by removing an adjacent ceiling tile during installation.
B.
C.
D.
E.
12
Lift dome to bracket flange ensuring head of screws (previously fitted cap head
screw) pass through keyhole slots. Twist to locate.
Mate the previously prepared central connector, refer to ‘Electrical Connections’
for more information, supplying power & control to dome (ensure power is off when
connecting).
Tighten 4 top mounting fixings with Hexagonal key supplied to secure.
Secure any plastic covers or trim (wall/pendant installations only).
Dedicated Micros ©2008