1
Download 1. - Auto ID
Transcript
Barcode Handy Terminal USB connection test 1. Have a USB cable ready and then connect the BHT to the host. 2. Select “2: CONNECTOR” at the TEST COMMUNICATION screen and then press the ENT key. During test, the screen on the right is displayed and the USB connection test is carried out. Press the Backspace/clear key to abort the test and return to the TEST COMMUNICATION menu. If no connection is made within 15 seconds, a buzzer sounds three times and the screen on the right then appears. Press the Backspace/clear key to return to the TEST COMMUNICATION menu. If the connection is made, a buzzer sounds once and the screen on the right then appears. Press the Backspace/clear key to return to the TEST COMMUNICATION menu. 113
