Download User Manual

4.7. Inclination sensor
An inclination sensor on the control board of the NIR120 M drying module watches
the operating position of the module (default configuration horizontal alignment).
If the positional deviates more than ~10° from the horizontal, the module will be
locked. The status LED turns red and the push button status LED will blink red.
To unlock put the device in the operating position and push the push button (both
status LEDs will turn green).
Note for NIR120 M2, NIR120 M3, NIR120 M4:
These models can be configured via USB.
Option to be configured:
• Operating position
• Tolerance of inclination angle
Call +1 262-790-9100 (US) or +49-8061-395-0 (GER) for detailed information.
Table 8: meanings of status LED Inclination sensor
Status
Meaning
Blinking red, fast
Signal from sensor is invalid (e.g. not calibrated)
Red
Out of operating position, module ready
Green
In operating position, module is ready or running
Version 3.0
Page 21 of 35