Download Getting Started Computing at the Al Lab by Christopher C
Transcript
Getting Started Introduction Page 2 1.1. Lisp Machines The lab has a number of personal computers called Lisp Machines, which were designed at the AI lab. The current Lisp Machine processor is a stack&oriented order code machine called a CADR. With microcode to implement the Lisp primitives, and a sophisticated Lisp s.ystem on top, LispMs comprise the most powerful segment of our computing resources. The Lisp system software for the Lisp Machine was originally written at the Al lab. It is being continually enhanced and improved by both people at the lab, and by outside companies who manufacture Lisp Machines. Lisp Machines use special consoles with hi-resolution bit-mapped displays and fancy keyboards, and little boxes known as mice which are fun to roll around on tabletops. Some of the Lisp Machines are equipped with high resolution color displays. Our current LispMs were constructed at the laboratory; there are plans to purchase many additional machines which feature an improved hardware design from outside the lab in the near future. Some of the LispMs have Floating Point Systems hardware attached to them. These peripheral processors can be used for certain types of number -crunching. for example, the FPS boxes are used for doing some of the computations required for speech analysis. One Lisp Machine (CADR-27) has been dedicated as a central Filecomputer. The Filecomputer has several 300 megabyte disk drives attached to it, and represents a bulk repository for files, 7 September 1982