Download Additional file 2

Page: 25 of 35
FSPS User Manual
Chapter 3.1 (Control Tab 0, Continuous or Triggered acquisition)
Allows you to choose between
continuous (Chapter 2) and triggered
(this chapter) acquisition depending on
your needs and experimental design.
Chapter 3.2 (Control Tab 1, hardware info & settings)
PSTH internal tab (hardware-based)
Commonly,
electrophysiological
recording systems contain an option to
perform spike isolation using hardware
voltage discriminator. This makes it
possible to roughly characterize
neuronal activity and its specificity
instantly and during recording process.
This function is also offered by this
software, in parallel with the Fuzzy
Spike Sorting procedure. Please note,
that to acquire the signal from your
window discriminator hardware (in our
case it is channel 2), you need to reserve a separate I/O channel at your DAQ .
“A” can be used to switch auto scale for PSTH graph ON (green) or OFF (dark).
UNIFE, Section of Human Physiology, 2012