Download TD 200 Operator Interface

Operating the TD 200
3.2
Using the Menu Mode
The Menu mode of the TD 200 allows you to view all messages, display the S7-200 CPU
status information, view and set the time and date in CPUs with real-time clocks, force I/O,
release the password, and modify the configuration of the TD 200.
The TD 200 enters the Menu mode when you press ESC and the cursor is at the left-most
character of a line. The TD 200 immediately displays the first menu item as shown in
Figure 3-2 (providing that password protection is not enabled). If the password protection
option is enabled, the TD 200 displays a prompt for entering the password (a four-digit
integer from 0000 to 9999). Enter the correct password to view the first menu item as shown
in Figure 3-2.
SIEMENS
F5
F1
TD 200
F6
F2
F7
F3
F8
F4
SHIFT
Figure 3-2
ESC
ENTER
Menu Mode
Menus Available
The menu items available in the Menu mode are:
S
S
S
S
S
S
View Messages
View CPU Status
Force I/O (if allowed in parameter block)
Set Time and Date (if allowed in parameter block)
Release Password (if enabled)
TD 200 Setup
Selecting Menu Options
To select a menu item, you scroll through the list of available items by pressing the UP and
DOWN arrows. When the desired menu item is displayed, press ENTER.
Exiting Menu Mode
The TD 200 exits the Menu mode when you press ESC during the display of one of the
menu items. Also, the TD 200 exits the Menu mode automatically after one minute and
returns to the Display Message mode if you have not pressed any keys.
SIMATIC TD 200 Operator Interface
C79000-G7076-C205-04
3-5