Download TD 200 Operator Interface

Configuring the TD 200
Now that you have set the format to require acknowledgement of the message, the
Acknowledgement notification bit field displays the address location of the
acknowledge-notification bit, as shown in Figure 2-16. This location can be used in the user
program to take an action when the user acknowledges the message on the TD 200. The
TD 200 sets this bit to 1 when the message is acknowledged. The user program is
responsible for resetting the acknowledge-notification bit to 0 if it is used within the program.
Click the “Finish” button to exit the TD 200 Configuration Wizard.
TD 200 Configuration Wizard
You have asked to configure 3 message(s). Define your message by
placing your highest priority message first.
Message 3 of 3
5
10
15
A C K N O W L E D G E
25
B Y
P R E S S
INS
Note: The address of
the acknowledgenotification bit is
displayed.
Embedded Data...
20
M E S S A G E
30
35
I N G
E N T E R
40
Message beginning address:
VB80
Message enabled bit:
V12.6
Acknowledgement notification bit:
V78.1
<Previous Message
< Prev
Next Message >
Finish
Cancel
Figure 2-16 Wizard: Message Requires Acknowledgement
2-16
SIMATIC TD 200 Operator Interface
C79000-G7076-C205-04