Download User Manual - Comkit Online
Transcript
11. CONTROLS LIGHTING, INSTRUCTION RELIGHTING AND SHUT DOWN IMPORTANT: DO NOT TURN ON MAIN BURNER UNLESS THE OIL IS FILLED TO THE CORRECT OIL LEVEL MARKED AT THE REAR OF THE PAN 1. Depress and turn gas valve knob to off position. If flame goes out wait five (5) minutes before reigniting. 2. Turn knob counter-clockwise to pilot position, depress knob and light pilot. Continue to depress knob until pilot remains alight when knob is released (approximately one minute). Turn knob to ON position. 3. Set thermostat as desired. Thermostat will actuate gas flow to the main burner. For temporary or permanent shutdown, depress and turn gas Valve knob to OFF position. JGSD-125-100-0 18 IM085B1 – September 2010