Download User Manual - Sensortronic Scales

4. Label Print Quantity
• Enter the total number of label printing to print.
You can enter 1-99.
2.11.19 List Job Batch Schedule (Menu code 1452)
( MENU → 4. Store Data Table → 5. Job Batch Schedule →
2. List Schedule )
1. Set the list range
• Set the list range to check
EX) 1~1999
2.11.20 Delete Job Batch Schedule (Menu code 1453)
( MENU → 4. Store Data Table → 5. Job Batch Schedule →
3. Delete Schedule )
1. Job Batch Schedule number to delete
EX) Delete Job Batch Schedule no. 2
2.11.21 Scanner (Menu code 1460)
( MENU → 4. Store Data Table → 6. Scanner )
This menu is used to make barcode scanning sale available or just to call up PLU.
2.11.22 New/Edit Scanner Conversion Table (Menu code 1461)
( MENU → 4. Store Data Table → 6. Scanner →
1. New/Edit Comv Table )
This is Mapping Table between scanned bar code and PLU number.
1. Setting up scan code No
Maximum number of Conv Table. Index is 1999
2. Setting up mapping Code
Enter the number ranged between 1 and 13.
3. Setting up department No
Enter the Department number of the PLU to be mapped.
4. Setting up PLU No
Enter the PLU number to be mapped.
101