Download Manual - EH Wachs

Chapter 6, Routine Maintenance
Chapter 6
Routine Maintenance
Daily Maintenance
After each use, clean debris from all moving parts, includ­ing the guide shafts, reciprocating shafts,
and saw frame guides. (See assembly drawings in Chapter 8 for identifying components.) This
will prolong the life of the machine.
1.
Use a brush or compressed air to remove loose debris from all sliding surfaces.
2.
Neutralize any corrosive fluids that the machine may have come into contact with during
operation, by wip­ing surfaces with a clean cloth sprayed with a house­hold cleaning solvent.
Lubrication
There are 6 grease fittings on the Guillotine saw. Lubricate all fittings with a good grade of soft
grease each day before using the saw. The fittings are illustrated in Figure 6-1.
E.H. Wachs Part No. 03-MAN-01, Rev. B31