Download - Digital Combustion

Network
Why: The Network feature is applicable only to those connecting to Digital Combustion's
Communication Link software over a Local Area Network or the Internet using a Virtual
Private Network. This command activates the connection process to connect to
Commlink.
How:
1) Prior to using this function, your computer should be connected to the network and
Communication Link (Commlink) should be running. Refer to the Communication Link
manual for more details on the network connection requirements and setup.
2) Click on the Network button or press “N.” This brings up the Network Panel.
3) User name : Enter in a unique name which will identify you and this computer in
Communication Link and press Enter. Another person connecting to Commlink cannot
share the same name.
4) Room : Enter the Room Name you are connecting to and press Enter. This should be the
same name created by the Commlink Operator when Commlink was launched. It must be
the same name in order to connect properly.
5) IP : Enter the IP address of the Commlink computer and press Enter. This will appear on
the Commlink screen when it first launches.
6) Port : Enter the Port number that Commlink is using and press Enter. This will appear on
the Commlink screen when it first launches.
7) Click on Connect. Fire Studio will attempt to locate Commlink and establish a connection.
21