Download Installation and Introduction to Programming

13.
In the Colors dialog box, click and drag Yellow to 0%. Click the associated
Off/Snap/Fade button until it is set to Fade.
Click the Save Sequence button in the Sequence [0000 No name] dialog box or
toolbar. The Save Sequence dialog box appears.
15. Click Clear after Save and Add Sequence to Current Cue.
16. Type CMY ch ase in Sequence name.
17. Click Save as New Sequence or press Enter to save, clear, and add the sequence to
the current cue.
14.
18.
Notice that the CMY faders in the Colors dialog box are now moving as the
sequence is performed.
Step 4: Program movement sequence
The LightJockey has a sophisticated effects engine for generating movements. This is
described in detail in the on-line help.
In this sequence you program each fixture individually to move in opposite directions.
1.
2.
3.
On the LightJockey desktop, click to select the Le ft MAC 600 (selection is indicated
by a red label) and deselect the R ight MAC 600 (non selected fixtures appear with
blue labels).
If the Movement 16 Bit dialog box is not open, click the Movement button on the
Fixture toolbar.
Using the Movement 16 Bit dialog box, click and drag the round white movement
cursor to the middle of the top-right quadrant.
59