1
Download XT85 User Guide
Transcript
Setting Up the XT Series Device XT85 User Manual Communication Ports The table below identifies the XT85 Comm Ports that are currently allocated. When selecting a Virtual Comm Port the Comm Ports below will not be available for use if the XT85 is configured with that function. COM2 Physical COM for Bluetooth Will be occupied when the Bluetooth function is turned on COM4 Physical COM for IrDA Will be occupied when the IrDA function is turned on COM5 Physical COM for bottom connector Fully accessible by user application (Non multiplex) COM6 Physical COM for SE965 laser scan engine COM7 Physical COM for u-blox GPS module COM9 Virtual COM for GPS applications Janam Technologies LLC Will be occupied when the Laser Scan Engine is in use By default, COM9 will occupy and control COM7. If an application uses COM7 directly, then other applications will not be able to access the GPS data In order for multiple applications to simultaneously acquire GPS data, the applications need to configure GPS communication with COM9 3―19
