Download DRP User manual

ENT
Press ENT for 〝stage 2 relay activation〞
↓
Act2
Press ▲▼ to set 〝Act2〞at Lo value
↓
ENT
Press ENT for 〝stage 2 relay deferred activation〞
↓
dEL2
Press ▲▼ to set 〝dEL2〞 (from 0.0 to 99.9)
↓
ENT
Press ENT for 〝relay no action within range of minor current
Fluctuation〞
↓
ScL
Press ▲▼ to set 〝ScL〞 (from 0.0 to 0.9)
↓
ENT
Press ENT for 〝Duration under ScL〞
↓
Scd
Press ▲▼ to set 〝Scd〞 (from 0.0 to 99.9)
↓
ENT
Press ENT to complete the setting
4. Preview the settings
ON
Power on
ON
↓
XX.X
↓
Normal display
XX.X
↓
P1
Press p1 to view AL-1
P2
Show the value of AL-1
AL-2
Press ENT for 〝stage relay
ENT
deferred activation〞
Press ENT for 〝stage relay
deferred activation〞
↓
Show dEL1 value
dEL2
↓
ENT
Show the value of AL-2
↓
↓
dEL1
Press p2 to view AL-2
↓
↓
ENT
Value display
↓
↓
AL-1
Power on
Show dEL2 value
↓
Press ENT to go back to
normal display
ENT
Press ENT to go back to
normal display
REMARK:
z Under preview setting, any setting over 20 seconds, the setting will be resumed to the normal
display.
z Under parameter setting, any setting over 5 seconds, the setting will be resumed to the normal
display.
３