Download The manual - FlightAssistant
Transcript
FlightAssistant User Guide Doc v2.20 The "overview" page The overview page gathers most of the flight current data. It is fairly reach but should only be considered as a "catch all" summary. Other pages offer a more synthetic view. Current ground speed and ground track. In "flight plan", "GOTO" and "direct to" mode, origin of the current leg courante (the waypoint we are coming from). Distance to the destination waypoint (of the leg, the GOTO). Route towards the next waypoint. This is the bearing we shoud fly in order to joing the destination waypoint of the leg in a straight line. Deviation from the theorical route (of the leg, the GOTO). If the deviation is positive the theorical route is on our right side, if it is negative the route is on our left side. Track defined in the flight plan for this leg. 21 Estimated Time of Arrival : estimated time of arrival to (or over) the destination waypoint (of the leg, the GOTO). Estimated Time En route: remaining flight time to reach the destination waypoint (of the leg, the GOTO). Current leg block. THE CURRENT LEG BLOCK This blocx exists in a few pages, but the information are always the same. Description of the waypoint Name of the waypoint "To" symbol. Desired track of the leg (defined in the flight plan or when the GOTO mode was engaged) Cruise altitude Distance of the leg (from destination to origin). Arrival altitude. Arrival altitude indicator (are we climbing or descending towards the arrival altitude). A similar block exists for the next leg (the one after the current one). The "To" symbol is replaced by the "Next" symbol. FlightAssistant v1.0.5 Page 21/69