Download KAM`98 - Kantronics

KAM’98 Commands
Command Reference
When operating with multiple connects allowed, the connection will take place
on the next available stream. Connect requests in excess of the number allowed
by the USERS command will receive a <DM> response and the “connect request: (call)” message will be output to your terminal if INTFACE is TERMINAL or NEWUSER.
See also: conmode, connect, intface, maxusers, monitor, nomode, users.
CONPERM
{ON | OFF}
Default OFF
Setting CONPERM to ON forces the connection on the current stream to become
permanent and causes the KAM’98 to attempt to reconnect when it is restarted.
CONPERMED connections are shown with /P in the status display, which is generated by the STAT command.
See also: status
#
CONVERS
immediate
CONVERS has no options. It is an immediate command and will cause entry into
Conversational Mode from Command Mode on the current I/O stream. Any link
connections are not affected.
+
Hint: K is the same as CONVERS, for quicker entry.
See also: k, command
CPACTIME
{ON | OFF}
default OFF
When OFF and in the Convers Mode, packets are sent when the SENDPAC character is entered or when PACLEN is achieved. When ON and in the Convers
KAM’98 v 8.3
243
User’s Guide