Download KAM`98 - Kantronics

Command Reference
PREKEY
KAM’98 Commands
n
(n = 0 - 31)
default 0
This command sets a time delay between the assertion of PTT and the beginning
of any audio from the KAM’98 Radio port to the radio. The audio will begin n *
0.10 milliseconds after the PTT line is activated.
See also: postkey.
PROSIGN
n
(n = $00 - $FF)
default $5C
The PROSIGN command is used to select the character used to introduce a CW
prosign. When the selected character is entered during CW transmission or
within text to be used for CW transmission, it will cause the NEXT TWO character codes to be combined. For example, \AS will cause the codes for A and S to
be combined into the “wait” code, or “AS.”
See also: morse.
PTDOWN
n
(n = 2 - 30)
default 6
Sets the number of consecutive bad frames received before switching to 100 baud
Pactor.
PTERRS
n
(n = 30 - 255)
default 80
Sets the time-out attempts for Pactor. When attempting to link with another station, the KAM’98 will time out after n attempts without response. When already
linked, reception of n consecutive faulty frames results in a timeout.
User’s Guide
298
KAM’98 v 8.3