Download H8SX E6000H Emulator User`s Manual

Section 3 Debugging
3.1.2
Customizing the Settings for the Target MCU
Selecting [Custom Device enable] in the [Configuration Properties] dialog box adds the [Custom Device] page to
the dialog box.
Figure 3.2 [Configuration Properties] Dialog Box ([Custom Device] Page)
Use this page to customize the target MCU. This procedure is necessary when the target MCU currently in use is
not included in the list of [Device]. The items are adopted by the device last selected.
[Custom Device] page
[ROM]
Select the on-chip ROM area size.
[RAM]
Select the on-chip RAM area size.
[ExRAM]
Select the size of the expansion RAM area.
[Port]
The ports for use must be selected here. Select the ports that you want to
change the settings and press the [Enable] or [Disable] button to enable
or disable the ports. [*] or <*> is displayed with the enabled ports and [-]
or <-> with the disabled ports.
[Modules]
The on-chip modules for use must be selected here. Select the on-chip
modules that you want to change the settings and press the [Enable] or
[Disable] button to enable or disable the on-chip modules. [*] or <*> is
displayed with the enabled modules and [-] or <-> with the disabled
modules.
Rev.11.00 Jan. 28, 2009 Page 15 of 166
REJ10J1130-1100