Download BT Hudson 1500 User Guide - Home

15
Receiving a call
When the phone rings the display shows the caller’s number
if available or the caller’s name if it matches an entry in the
phonebook. If you do not have a Caller Display service, the screen
shows External call.
1. Press
to answer the call.
Or lift the handset off the base or charger.
Earpiece/Handsfree volume
During a call you can adjust the volume of the earpiece or handset
loudspeaker. There are 5 levels.
1. Press
or
Auto answer
As long as you have auto answer
set to ON you can answer a call by
lifting the handset off the base.
If you have switched auto answer off,
you will need to press
as well.
Auto answer ON is the default setting.
See page 25.
to increase or decrease the volume.
Mute (Secrecy)
During a call, you can talk to someone nearby without your
caller hearing.
1. Press Mute. Your caller cannot hear you. MUTE ON is shown
on the handset screen.
2. Press Unmute to return to your caller.
Handsfree
Handsfree lets you talk to your caller without holding the
handset. It also enables other people in the room to listen to your
conversation over the loudspeaker.
Make a handsfree call
1. Dial the number then press
twice. You hear your call
again to switch the
over the handset loudspeaker. Press
call between the loudspeaker and the earpiece.
Answer a call handsfree
1. Press
twice. The call is transferred to the handset
loudspeaker.
During a handsfree call, press
or
to change the volume.
Auto answer is set to ON as the
default, see page 25. If you lift the
handset to answer and then press the
button the loudspeaker will be
activated.
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp