Download C-DOT V5.X INTERFACE

Chapter 7.
7.1.16.
PROT-INF
PARAMETER NAME
:
Protocol Information
MNEMONIC
:
PROT-INF
DEFINITION
:
Holds information regarding peculiarities of the
Access Network such as i) Caller-id type :
To be given as a DTMF tone
or as a signal message
ii) Backward signalling : Access dependent or
Access independent
iii) Port-Alignment : Accelerated or not
iv) Link-Control Protocol : Enabled or disabled
v) Initialisation of Protocols : Parallel or Serial
vi) Switchover to Secondary : Sequential or not
TYPE
:
Alphanumeric
POSSIBLE VALUES
:
NONE, BACK_SIG_ACC_DEP, CALL_ID_MSG,
ACCL_PORT_ALIGN, LINK_CTRL_DISABLED,
PARALLEL_INIT, SEQ_SWITCHOVER
DEFAULT
:
None
REMARK
:
7.1.17.
RPT-ID
PARAMETER NAME
:
Report Identification
MNEMONIC
:
RPT-ID
DEFINITION
:
It denotes the type of traffic report that is to be
displayed. This is an existing input parameter.
TYPE
:
Alphanumeric
POSSIBLE VALUES
:
New values V5.1-REP and V5.2-REP shall be
added for denoting V5.1 an V5.2 AN interface
reports.
DEFAULT
:
REMARK
:
60
C-DOT V5.X INTERFACE