Download PROFINET - Cod. vec1027 r0

13.4 Application warning messages
When the highest bit of the warning message is set, an “Application warning message” is present.
The application warning messages are bit-encoded as per the following pattern via parameter Application warnings 274. Parameter Application warnings 273 indicates the warnings as plain text in
the control panel and the VPLus PC control software.
Use parameter Application warnings 274 in order to read the warning messages via Field Bus.
Bit no.
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Warning
code
0x0001
0x0002
0x0004
0x0008
0x0010
0x0020
0x0040
0x0080
0x0100
0x0200
0x0400
0x0800
0x1000
0x2000
0x4000
0x8000
Application warning messages
Description
BELT
SW-LIM CW
SW-LIM CCW
HW-LIM CW
HW-LIM CCW
CONT
ENC
User 1
User 2
(reserved)
(reserved)
(reserved)
(reserved)
(reserved)
(reserved)
(reserved)
- V-belt
– SW limit switch clockwise
– SW limit switch anticlockwise
– HW limit switch clockwise
– HW limit switch anticlockwise
– contouring error
– Warning Absolute encoder
– User Warning 1
– User Warning 2
For details on the warnings, refer to the frequency inverter Operating Instructions and
the “Positioning” application manual.
The Warning Bit 6 “Absolute encoder” can be read out via Parameter 1274 in VPlus or
1273 via field bus. The Absolute encoder warnings are described in detail in the Extension manual EM-ABS-01.
130
CM-PROFINET
10/13