Download Operator`s Manual

Maintenance
Drive Belt
• Stop engine when servicing drive belt. Hand or fingers can be tangled.
• Adjust belt tension properly. Inproperly tensioned belts may reduce
performance and its service life.
Inspecting
Lock Nuts
Drive Belt
1.
2.
3.
Push clutch lever to [ (ON)] position.
Remove safety cover. (page 53)
Visually inspect drive belt. If it is damaged,
replace.
Tension Arm
Spring
Turnbuckle
3677M-0708-031US
NOTE
• Contact your CANYCOM representative
when belt needs to be replaced.
Adjusting
Spring
114-116mm
1.
2.
Remove safety cover. (page 53)
Loosen lock nut.
3.
Adjust turnbuckle so that the inside
dimension between spring hooks is between
4.
114 and 116 mm.
Install safety cover.
3677M-0708-091US
-55-
5