Download Installation Manual

Installation Manual
Rev1.03
Date 09-2014
7. - Daikin Interface Board
This Interface provides the communication between Zoning box control
board and Daikin Indoor unit.
8. - Expansion Bus
The expansion bus allows the connection of the Main Thermostat.
There are 3 connectors with 5 contacts available to connect the
expansion Bus. The Main Thermostat is connected to this bus.
Connect the cables to the connector contacts according with the color
code indicated below.
9. - Wireless Interface
This device provides the communication between the Zoning box
control board and the Wireless thermostats.
Keep in mind
Once this sequence is
started it cannot be
interrupted and the
Quick Setup process
should be allowed to
finish.
10. - Reset System Button
If the whole system needs to be reset (normally a replacement board
that has been used before, or at the request of the technical support as
a last resource to fix a problem), press and hold SW1 until LED 19
stops flashing. A system reset will return all configurations to default
values and conditions.
21