Download FEDRA Masonry

Transcript
FEDRA Masonry Buildings
•
RUNETsoftware
Masonry units
List of masonry units in the program. In order to see the properties or to change them click
at Edit, or double click on a table line. Basic requirement of Eurocode 6 (§2.2), for the
compressive strength is fb>=2.5 Ν/mm². This list and the masonry unit properties must be
updated with the data of the region, or country the program is used.
Give the properties of the masonry units at the corresponding boxes. You can also choose
the type of masonry units from the six types of Eurocode 6. From the dimensions of the
masonry unit the values of coefficient δ is obtained based on Eurocode §6.3.1.2 table 3.2.
The category I or II depends on the quality control criteria. The group of the masonry units
is according to Table 3.1 of the Eurocode 6.
User Manual
28