Download User`s Manual - Future Design Controls

Transcript
Warning Symbol
The Symbol calls attention to an operating procedure, practice, or the
like, which, if not correctly performed or adhered to, could result in
personal injury or damage to or destruction of part or all of the
product and system. Do not proceed beyond a warning symbol until
the indicated conditions are fully understood and met.
Use the Manual
Installers
Read Chapter 1, 2
System Designer
Read All Chapters
Expert User
Read Page 15,16
NOTE:
It is strongly recommended that a process should incorporate
a LIMIT CONTROL like L91 which will shut down the equipment
at a preset process condition in order to preclude possible
damage to products or system.
Information in this user's manual is subject to change without
This manual is applicable for the products with software
version 22 and later version.
Copyright a July 2012, The Brainchild Corporation, all rights
reserved. No part of this publication may be reproduced,
transmitted, transcribed or stored in a retrieval system, or translated
into any language in any form by any means without the written
permission of the Brainchild Corporation.
2
UM0B421A