Download User manual - COMM-TEC

Menu System
Basic Operation
14. Use the numeric keypad to enter the desired subnet mask address.
If a one or more digits in the address is less then three digits in length, then preceding
zeros must be used to pad the value. For example, if one of the numbers is 10, then
you would enter 010 on the keypad. If the number is 5, then you would enter 005.
The cursor will automatically advance to the next digit in the subnet mask. If an error
is made, use the ◄ or ► to move backward or forward between each digit.
®
1
2
3
Preset
4
5
6
Mask
7
8
9
Clear
In
0
Out
Set
Menu
Lock
OK
OR
Status
Power
IR
Back
Matrix Controller
15. Press the OK button to save the change. For this example, we will leave the subnet
mask set to 255.255.255.0.
LAN
subnet mask:
255.255.0.0
16. Press the ▲ or ▼ buttons to select the Gateway setting. The gateway address
will be displayed.
gateway:
192.168.1.1
17. Press the OK button to change the setting. The first digit of the gateway address
will flash.
gateway:
_92.168.001.001
page | 89