Download User manual - COMM-TEC

Advanced Operation
Commands
#set_ip_address
Sets the IP address of the Matrix Controller. The IP address must be entered using
dot-decimal notation. The Matrix Controller must be rebooted after executing this
command. The default IP address for the control port (LAN 1) is 192.168.1.74.
The default IP address for the video port (LAN 2) is 192.168.1.75.
Syntax
#set_ip_address param1
Parameters
param1
Integer[1 ... 2]
param1
Description
1
Control Port (LAN 1)
2
Video Port (LAN 2)
param2Address
Example
#set_ip_address 2 192.168.1.75
IP_ADDRESS 192.168.1.75
Related Commands
#get_ip_address
page | 161