Download VCube 4.0.10 User Manual

Watermark and Text
Watermark, Copyright and Text Clips can be added to a Composition. These functions are useful for security and
other purposes.
Watermark
Overview
The Watermark function enables a still image and or Copyright Text to be added to the current Composition. Simply load a still image file (with alpha channel supported) and or enter and position the Copyright Text. A Watermark image file must be of the same dimensions as the desired output video format to avoid real-time stretching.
Settings
Watermark settings can be found in the Composition Tab:
Watermark Settings
Enable
When Enable is checked a user selected Watermark image will be added, in real-time, to
every video output. Both Text and still image are possible.
Note: Enable must be active in order to access the Watermark settings.
Load Watermark Image File
Clear Watermark Image File
Opens a Windows File Browser to locate and open the
desired image file.
Image transparency, size and position must be set in the image file in a
suitable Image Editor, matching the current video format.
Unloads the current Watermark Image file
Overlay Text
Type any text required in the field
Position
The drop-down list offers a wide range of positions on screen for the text.
Horiz. Offset
Offsets the text by the number of pixels typed in the box to the right or left
depending on the anchor position chosen above. When Center - xx is chosen no
offset is possible.
Watermark and Text : Watermark
Page 73