Download Display - Service, Support

Preface
Purpose of the
description
This description provides you all the information you need for utilizing
PCS 7/TM. These are primarily
• A product overview with a brief description of the functions, the system
requirements, the interfaces and the delivery form
• The installation and application of the TELEPERM M channel DLL
• The acceptance of configuration data from PROGRAF AS into the WinCC
data manager and the entry of TELEPERM M messages in the WinCC signaling system, using the programming tool TM_Manager
• The peculiarities that must be observed when using WinCC
The listed tools help the user to simplify and optimize the TELEPERM-Mspecific configuration in WinCC.
The standard control displays - (NORA)/OCX blocks - as the basis of tradespecific libraries are described in a separate document.
Readers
This description is aimed at people who work in the configuration of I&C
systems.
Requirements
Working knowledge of the general handling of personal computers and the
work with PCS 7/TM is required.
Furthermore, the reader must be familiar with the TELEPERM M process control system, in particular with PROGRAF AS+ and the OS operator communication and visualization systems.
Several Reference Manuals are available for further information (see Applicable Documents in Appendix B).
Standard
The PCS 7/TM software is based on the international standards
DIN EN 61131-3 (IEC 1131-3) for programming languages.
PCS 7/TM
C79000-T8076-C740-17
III