Download 20130631 - Toptech Systems

Transcript
Chapter 4 – General Configuration
4.14
132
CUSTOMER LOGO SETUP
When the MultiLoad II is idle (not authorized for loading), the screen displays a message instructing the driver
how to begin the authorization process.
Press Next to Begin
For Access
Insert Driver Card
For Access
Press Next to Begin
For Access
Insert Driver Card
For Access
The display also alternates between three graphic images, 2 Product Identification Images, and a configurable
customer logo (default customer logo is the “Toptech Systems” graphic.
There are two methods to configure this customer logo: Load from a built in customer logo or upload a custom
.bmp file.
Firmware Version 3/4.31.11