Download 20130631 - Toptech Systems
Transcript
Chapter 4 – General Configuration 4.14 132 CUSTOMER LOGO SETUP When the MultiLoad II is idle (not authorized for loading), the screen displays a message instructing the driver how to begin the authorization process. Press Next to Begin For Access Insert Driver Card For Access Press Next to Begin For Access Insert Driver Card For Access The display also alternates between three graphic images, 2 Product Identification Images, and a configurable customer logo (default customer logo is the “Toptech Systems” graphic. There are two methods to configure this customer logo: Load from a built in customer logo or upload a custom .bmp file. Firmware Version 3/4.31.11
Related documents
KD 225_350_420_15-440
MultiLoad II Benutzerhandbuch Einschließlich
MCG 3900 - L&J Technologies
Operating Manual - Fisher UK Extranet
Manual - RayBiotech, Inc.
20121031 MLII_SMP_Installation Guide
Intelligence Panel PC User`s Manual, GFK2023C
Communication Interface Software
Generic Q7 Carrier Card Hardware User Guide
DL8000 Preset Controller Instruction Manual
Main Line Colour Light Signal User Manual
Dynamix DW 4 FXO User guide