Download CS User Manual
Transcript
U|g|CS User manual, v.2.6 To minimize the interface click the Minimize button (Figure 16, l). You can also access the mission menu (Figure 16, f and Figure 18). Figure 18. Mission menu. Create new mission (Figure 18, a) starts the creation of a new mission. Start/Stop editing (Figure 18, b) allows the current user to gain/release control over the mission. This means that in a multiuser environment another operator will not be able to edit this mission until control is released. This means that another user can’t edit the mission while it is under the control of the current user. But if the current user releases control, another user can edit it. Open (Figure 18, c) allows you to switch between missions. Remove (Figure 18, d) deletes the current mission. Import mission (Figure 18, e) allows you to load a mission from a file. Export mission (Figure 18, f) allows you to save a mission to a file. Adding a New Route To create a route - select the “New route…” (Figure 14, c) icon. There can be more than one route in a mission. Route creation consists of three steps. Route Name and Vehicle Profile The first step is to choose whether to draw the route manually or to import the route from a file. Select Create from scratch and move to next step to create a new route. Select Import from file to import existing route. Click Browse in appeared string and specify the path to the file with route. Import from .xml and .kml is available. 21