Download "user manual"

Transcript
GENIUS
HANDBOOK
04th AUGUST 2008
4 CONNECTIONS, PORTS AND LED
Front Side
A) 1 USB port
B) 1 slot for SD Secure Digital card
C) 1 green LED for SD:
it is on and still when the SD card is plugged in
It blinks when file are being saved on the SD card
D) 1 green LED for USB:
it blinks when Genius is communicating with Race EVO
Back Side
E) 1 Diagnostic Port to plug the OBD cable or the universal wire for serial connection
F) 1 DC IN connector to connect to the 12 Volt 110/240 V PSU
G) 1 green LED “data transfer”: NOT YET FUNCTIONING
H) 1 red LED for ext power:
it’s ON when Genius is powered
Bottom Side
I) 1 RESET button (to be used ony upon request of the technical support– i.e Genius is not
responding -)
L) 1 button to open the SD reader (to be opened and removed ony upon request of the technical
support: with a tipped tool carefully press the hole marked in the picture below as far as the cover is
open. To remove the SD card press slightly the card as far as there is a click, then release the card.
Dimensione Sport s.r.l.
9