Download Manual - Ibramed

15
RUSSIAN – Mode: SEQ. (sequential)
FREQ (Hz) – (frequency in Hertz): in this case the equipment will operate at an average
frequency of 2.500 Hz, modulated by a low frequency of the range chosen by the therapist,
from 1 Hz to 120 Hz. The stimulation sensation continues at the selected time on the Rise
gradient.
RISE (pulse increase gradient) – pulse increase time, variable from 1 to 20 seconds. It
regulates the sequence velocity of the channels.
Note: In the SEQ. mode, the sensation is transmitted from one channel to another in a
sequential manner, the first channel only stops the passage of the stimulation when the third
is transmitting the same stimulation frequency. Thus, there is no chance of a liquid reflux. The
equipment allows for a sequential selection from 4 to 10 channels.
RUSSIAN – Mode: DES (clearing)
FREQ (Hz) – (frequency in Hertz): in this case the equipment will operate at an average
frequency of 2.500 Hz, modulated by a low frequency of the range chosen by the therapist,
from 1 Hz to 120 Hz. The stimulation sensation continues at the selected time on the Rise
gradient.
RISE (pulse increase gradient) – pulse increase time, variable from 1 to 20 seconds. It
regulates the sequence velocity of the channels.
Note: In the DES mode the sensation is transmitted from a channel to another in an increasing
sequential manner, and then, immediately in a decreasing sequential manner. The equipment
allows for a clearing selection from 4 to 10 channels.
Aussie current (Australian current) - Mode: CONT (continuous)
FREQ (Hz) – (frequency in Hertz): in this case the equipment will operate at an average
frequency of 1.000 Hz, or 4.000 Hz (chosen by the therapist) modulated by a low frequency of
the range (chosen by the therapist), from 1 Hz to 120 Hz. Selection of Burst in 4ms or 2 ms is
possible.
The stimulation sensation is continuous and constant.
Instruction Manual - NEURODYN 10 chanells 9ª edition (07/2012)