Download CAN - CSC595/2 DeviceNet

DeviceNet
1.2.2 Set Bit Rate, Display Bit Rate
Name:
Set bit rate
Input command syntax:
SB
Input parameter syntax:
< index(0-$F)/register-format
Name:
Display bit rate
Input command syntax:
DB
Output parameter syntax:
> index(0-$F)/register-format
The default bit rate is set by the coding switch at the front panel:
Setting of coding switch
Default-bit rate
[Kbit/s]
0
1
2
125
250
500
Table 1.2.1: Setting of default bit rate
This bit rate can be overwritten by the command ‘SB’, with any value except $FFFF. The new value
can be displayed by calling the command ‘DB’.
4
CAN CSC595/2 DeviceNet Manual Rev. 1.2