Download User Manual

Transcript
Setup->Trigger, set to “Save Key”, pulling and releasing the trigger
key will initiate the save cycle.
3.3.4 Viewing stored Images
z
Press Menu key to activate the main menu. Choose File->Open to
open the image.
z
When image is opened, choose Left or Right keys to select the
previous or next images respectively.
z
If the instrument is in IR mode, it will display all IR images of each saved
image, it will display “No Image” if there is no IR image for that saved
image.
z
If the instrument is in CCD mode, it will display all CCD images of each
saved image, it will display “No Image” if there is no CCD image for
that saved image.
z
If the trigger is configured to IR/CCD mode by Setup->Sys.
Setup->Trigger, when in image view, the trigger can switch between
IR and CCD images for each saved image. it will display “No Image” if
there is no IR or CCD image for that saved image.
z
Press C key to exit the Image view mode and return to the real-time
measurement mode.
3.3.5 Export saved images
Images cannot be downloaded via the USB port. To export saved images,
remove the SD card and insert into SD card reader, connect to USB port on PC
and export saved images.
4 Operation guide
4.1 Graphic interface description
4.1.1 Screen graphic interface
21