Download Manual - Edlo Sales & Engineering

System Overview
STwrench User Guide
IRC-W
Access Point
Network
The STwrench can work as a stand-alone instrument for either production or quality control, programmed
by its management software (ToolsTalk BLM), which can retrieve tightening results and traces, to be
printed in an exported Microsoft Excel file if required.
By using the QATnode I/O (but also the QATnode T provides this feature), the selection of the tightening
programs can be done by a remote device (such as a PLC). This QATnode version allows also to print the
tightening results on a STAR printer. The connection can be done by using the IRDA port, or IRC-W
module.
See the Working with the QATnode chapter for details.
2.2.3
Wrench connected to Power Focus
IRC-B
22 (258)
9836 4134 01 Revision 2010-05