Download Instructions Installation Commissioning

Assure each adapter is pushed
to the base of the bushing.
F
The three extension connectors
in position.
F
F
F
F
The three adapters in position.
Link together the three earthing
braids.
Position the cable ends as
shown above.
F
F
Firmly push each extension
connector onto its bushing
contact.
Fix and tighten the braids using
1 x H M8x20 screw + flat
washer + locking washer + nut.
Preparation of the extension unit
Remove the three white plastic
covers.
F
9.8
Switchboard assembly
The pins (8) are used to guide the
insulated tubes and ensure the
holes are lined up to bolt together
the upper section of the switch‐
board.
24
F
Clean inside the three bushings
with a cleaning cloth (2).
F
Put on the glove (3) and apply a
thin coating of grease (5) to the
insides of the bushings.