Download Professional DOS User Manual

◊
Two camera modes, one for taking “snapshots” of individual
screens and one for recording “movies” of your session.
◊
A simple menu for fine-tuning your remote control settings.
◊
Hot Keys to start file transfers, exit to a DOS shell, reboot the
Host PC, and more.
To select a command from the Access menu, press the capitalized
letter in the command name or move the cursor over the command
and press ENTER. Following is a description of each command:
Resume – Press R to return to Access mode.
Chat – Press C to start Chat mode. Chat mode allows the Host and
Controller to type messages to each other on the Chat screen
(Figure 18-2), which is displayed on both the Controller and
the Host screens. Either side may initiate a Chat unless the
Host keyboard has been disabled. Once the Controller initiates a Chat, a disabled Host keyboard becomes active for
the duration of the Chat.
FIGURE 18-2
The Chat screen contains two windows, one for the Controller’s messages and one for the Host’s messages. Both sides
may type at the same time. Chat mode will terminate when
either user presses ESC.
Parameters – Press P to display the Session Parameters window
containing parameter fields that can be adjusted to
improve BHOST performance (see “Session Parameters Window” on page 313 for details).
REMOTE CONTROL
309