Download User Manual - LUCKINSlive

Transcript
Software Installation
How to Declare the Modbus Plus PCMCIA Card
The following table presents the procedure for physically declaring the Modbus Plus PCMCIA card
in the processor.
Step
36
Action
1
Open the hardware configuration editor.
2
Double click the PCMCIA communication card slot (bottom slot).
Result: The card type selection window appears.
3
Open up the Communication line by clicking the+ sign.
Result:
4
Select the Modbus Plus TSX MBP 100 card and then confirm with OK.
Result: The hardware configuration editor is displayed.
35006188 10/2014